Swing Dia.1000MM-1600MM(6t) Horizontal Engine Lathe
Swing Dia.1000MM-1600MM(6t) Horizontal Engine Lathe
Swing Dia.1000MM-1600MM(6t) Horizontal Engine Lathe
- Detail
- Parameters
his series of machine tools are mainly used to undertake all kinds of turning work, it can turn all kinds of parts of the end, cylindrical, bore and metric thread, inch thread, modulus thread, diameter thread. Can be used on the turret to cut the taper alone, but also can be used on the knife with the vertical feed with the long taper motor. In addition can also bear the drilling, nesting, boring and other processes. The machine power, rigidity, and can use carbide cutting tools for thread cutting, to process a variety of ferrous metals and non-ferrous metals.
CW61100B is the basic product, the maximum diameter of the bed diameter of 1000mm.
CW61125B is the basic heightening products, the maximum diameter of the body diameter of 1250mm.
CW61140B is the basic heightening of the product, the maximum diameter of the body diameter of 1400mm.
CW61160B is a special high-increase products, the maximum diameter of the body diameter of 1600mm.
| ITEM | UNIT | CW61100B | CW61125B | CW61140B | CW61160B |
| CAPACITIES | |||||
| Swing over bed | mm | 1000 | 1250 | 1400 | 1640 |
| Swing over carriage | mm | 615 | 865 | 1015 | 1250 |
| Max.length of workpiece | mm | 1500 2000 3000 4000 5000 6000 8000 10000 12000 | |||
| Max.turning length | mm | 1300 1800 2800 3800 4800 5800 7800 9800 11800 | |||
| Pan of guideway | mm | 755 | |||
| SPINDLE | |||||
| Spindle nose | mm | A2-15(8×M22) | |||
| Spindle bore | mm | 130 | |||
| Taper hole of spindle | 1:20/140 | ||||
| Range of spindle speeds | r/min | forward：3.15~315 ； reverse：3.5~291 | |||
| No.of spindle speeds | forward：21； reverse：12 | ||||
| FEED | |||||
| No.of Longitudinal and cross | 56/56 | ||||
| Feed per revolution | mm | Longitudinal：0.1~12;cross:0.05~6;top slide:0.025~3 | |||
| No. and range of metric thread | 44;1~120mm | ||||
| No. and range of inch thread | 31;28~1/4 | ||||
| No. and range of module thread | 45;0.5~60mm | ||||
| No. and range of dia. thread | 38;1/2~56DP | ||||
| turret | |||||
| Distance of centerline and tool resting plane | mm | 48 | |||
| Tool post swing range | ° | ±90° | |||
| Max.travel of cross slide | mm | 520(20″） | 580 | 580 | 630 |
| Max.travel of top slide | mm | 300 | |||
| Section of tool shank | mm | 45（260x260） | |||
| Rapid travel speeds | mm/min | Longitudinal:3740;cross:1870;Little slide:935 | |||
| TAILSTOCK | |||||
| Dia. of tailstock | mm | 160(6″) | |||
| Travel of tailstock quill | mm | 300(12″) | |||
| Taper hole of tailstock quill | morse 6 | ||||
| OTHERS | |||||
| Main motor power | kw | 22 | |||
| Length | mm | 4600 5100 6100 7100 8100 9100 11100 13100 15100 | |||
| Width | mm | 2150 | |||
| Height | mm | 1700 1825 2150 | |||
| Max.weight of workpiece | kg | 6000 | |||
