Swing Dia.1250MM-2000MM(16t) Large Swing Diameter Heavy Duty Horizontal Conventional Lathe Machine
Swing Dia.1250MM-2000MM(16t) Large Swing Diameter Heavy Duty Horizontal Conventional Lathe Machine
Swing Dia.1250MM-2000MM(16t) Large Swing Diameter Heavy Duty Horizontal Conventional Lathe Machine
- Detail
- Parameters
This series of machine tools are mainly used to undertake all kinds of turning work, it can turn all kinds of parts of the end, cylindrical, bore and metric thread, inch thread, modulus thread, diameter thread. Can be used on the turret to cut the taper alone, but also can be used on the knife with the vertical feed with the long taper motor. In addition can also bear the drilling, nesting, boring and other processes. The machine power, rigidity, and can use carbide cutting tools for thread cutting, to process a variety of ferrous metals and non-ferrous metals.
C61125 / 16T is a basic product, the maximum diameter of the bed diameter of 1250mm.
C61160 / 16T is the basic type of high product, the maximum diameter of the bed diameter of 1600mm
C61180 / 16T is the basic type of high product, the maximum diameter of the bed diameter of 1800mm.
C61200 / 16T is the basic type of high product, the maximum diameter of the bed diameter of 2000mm.
| ITEM | UNIT | C61125 | C61160 | C61180 | C61200 |
| CAPACITIES | |||||
| Swing over bed | mm | 1250 | 1600 | 1800 | 2000 |
| Swing over carriage | mm | 900 | 1250 | 1450 | 1650 |
| Max.length of workpiece | mm | 3000 4000 5000 6000 8000 10000 12000 | |||
| Max.turning length | mm | 2800 3800 4800 5800 7800 9800 11800 | |||
| Pan of guideway | mm | 1100 | |||
| SPINDLE | |||||
| Spindle nose | mm | A2-15 | |||
| Spindle bore | mm | 100 | |||
| Taper hole of spindle | Metric140 | ||||
| Range of spindle speeds | r/min | Forward：3.15~315； Reverse：3.5~291 | |||
| No.of spindle speeds | r/min | Forward：21 ； Reverse：12 | |||
| FEED | |||||
| No.of Longitudinal and cross | 56/56 | ||||
| Feed per revolution | mm | Longitudinal：0.1~12；Transverse：0.05~6；Up turret：0.025~3 | |||
| No. and range of metric thread | 44；1~120mm | ||||
| No. and range of inch thread | 31；28~1/4″ | ||||
| No. and range of module thread | 45;0.5~60mm | ||||
| No. and range of dia. thread | 38;1/2~56DP | ||||
| TURRET | |||||
| Distance of centerline and tool resting plane | mm | 53 | |||
| Tool post swing range | ° | ±90° | |||
| Max.travel of cross slide | mm | 740 850 900 900 | |||
| Max.travel of top slide | mm | 360 | |||
| Section of tool shank | mm | 50（380x380） | |||
| Travel of tool post (per turn of dials) | mm | 0.05(0.002″) | |||
| TAILSTOCK | |||||
| Dia. of tailstock | mm | 260 | |||
| Travel of tailstock quill | mm | 300(12″) | |||
| Taper hole of tailstock quill | Metric80 | ||||
| OTHERS | |||||
| Main motor power | kw | 30 | |||
| Length | mm | 6120 7120 8120 9120 11120 13120 15120 | |||
| Width | mm | 2058 2130 2330 2430 | |||
| Height | mm | 2200 2380 2480 2580 | |||
| Max.weight of workpiece | t | 16 | |||
